Skip to content

Airport and transportation painting · Collier County

Airport and transportation painting in Collier County

Collier County has four public airports. Naples Airport has its own City of Naples Airport Authority. The Collier County Airport Authority oversees three general aviation fields: Marco Island Executive, Immokalee Regional and Everglades Airpark. Romco quotes airport and transportation painting; it does not operate airports.

A long airport concourse with rows of yellow seats beside a curved glass wall.

An airfield job follows different rules from a normal repaint. Work in secured areas needs badging or an escort arranged with the airport operator before anyone is scheduled. Vehicles, lifts and paint materials have their own routes, and the operator may restrict work hours to keep flight operations clear.

The buildings differ by field. A hangar has a tall door and a large roof span. A small terminal has glass, soffits and metal trim close to passengers. A support building near fuel needs a hot-work and ignition plan agreed with the operator. Each gets its own access plan and coating scope.

Send what you have: the building, the operator, the access rules and the hours work is allowed. We scope the job from that, and any required badging and escort steps are listed in the quote.

Order of work

  1. Meet the operator to confirm access, badging and work windows.
  2. Walk the building and mark what stays in service.
  3. Submit staff lists for badging and agree escorts and routes.
  4. Stage materials and equipment at the approved location.
  5. Prepare and coat in the approved windows.
  6. Hand each area back to the operator after a joint inspection.

Where it goes wrong

The usual problems, and how each is held in check

Badging that takes time

Security clearance for secured areas must be arranged before work starts. We list the people and dates the operator needs, and schedule around approvals.

Limited work hours

Some areas close to work during flight activity. The sequence is written around the windows the operator gives.

Fuel and ignition risks

Work near fueling areas follows the operator's hot-work and ignition rules. We ask for them in writing and plan equipment and products to match.

The limits

Airfield markings, lighting and anything inside the operating area are set by the operator and aviation authorities, not by us. Badging decisions are the airport's.

Questions

About airport and transportation painting

Do you paint at Naples Airport or the county's airports?

We quote airport work across Collier County. Access, badging and work hours come from the airport operator, and the quote lists them.

Can you paint a hangar while aircraft are inside?

Sometimes. It depends on what the tenant allows, what is stored and what the operator permits, and the scope states the conditions.

What affects the cost of commercial painting?

No rate card exists, because two buildings are never alike. A quote is built after someone looks at the building, or at photos and plans good enough to show it. What moves it: the surface types and their wear, washing and repair needs, the coating system, how crews get to each wall, whether people are inside, and which approvals come first.

What size of painting job do you quote?

No size is too small or too large to quote. That covers a single tenant suite or storefront as readily as a Gulf-front tower, a farm packing building or an airport hangar. Tell us about the building and its surfaces, and the scope follows from that.

Is Romco Builders licensed?

Yes. Romco Builders holds a Florida general contractor license. The company was founded in 2015 and has its office in Fort Lauderdale. Ask for the license details and they arrive with your quote.

How a job runs

Six steps, in this order

  1. Send the address and surfaces

    Phone us or fill in the quote form. Say what is being painted, who remains inside and whether a date matters.

  2. We walk the building

    We inspect the surfaces and how they have weathered, work out how crews reach each wall, and list what must be shielded.

  3. Written scope and quote

    In the quote you will find the prep, the coating system, how crews get up, the phases, and each step held back by an approval.

  4. Approvals and permits

    A board or landlord color decision, city design review, permits that the work might trigger, and airport or site badging all come before the first coat.

  5. Prep and coating

    Wash, repair, prime, then finish coat, in the agreed order. Anything beneath an overhead crew stays shielded.

  6. Punch list and handover

    Together we inspect the result, clear whatever is on the punch list, and give you a record of the coating for the building file.

Airport and transportation painting across Collier, including Naples, Old Naples, Marco Island, Everglades City, Chokoloskee, Goodland, Isles of Capri, Immokalee, Golden Gate Estates, Bayshore Gateway Triangle, and every other Collier city.

Other painting work

Commercial painting for any building, including

Any building, any size, anywhere in Collier County

Send the building and the surfaces, and we will write the scope and the quote.

Romco Builders is a licensed Florida general contractor, headquartered in Fort Lauderdale. Whether it is a tenant suite or a beachfront tower, the scope is put in writing and the quote follows it.

Call (239) 510-4206Request a quote